Part Number Hot Search : 
J116B16 LM290 IN74AC STYN1030 M15BB12 G4BC20UD 001SMB SZN6322
Product Description
Full Text Search
 

To Download HSD150MX49-A Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  hannstar display corp. document title HSD150MX49-A product information page no. 1 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. to : date : nov . 28 , 2001 hannstar product information model : hsd150mx49 -a note : 1. please contact hannstar display corp. before designing your product based on this module specification. 2 .the information contained herein is presented merely to indicate the characteristics and perfor - mance of our products. no responsibility is assumed by hannstar for any intellectual property claims or other problems that may result from application based on the module described herein.
hannstar display corp. document title HSD150MX49-A product information page no. 2 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. record of revisions rev. date description of change 1.0 nov, 2001 hsd1 50mx49 -a product information was first issued.
hannstar display corp. document title HSD150MX49-A product information page no. 3 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. contents 1.0 general d escription ???????????? . ? p. 4 2.0 absolute m aximum r ating ?????????? .. p. 5 3.0 optical c haracteristics ???????????? .. p. 6 4.0 electrical c haracteristics ??????????? .. p. 11 5.0 block d iagram ???????????????? p. 13 6.0 interface p in c onnection ??????????? .. p. 14 7.0 interface t iming ??????????????? . p. 18 8.0 outline d imension ??????????? . ??? p. 22 9.0 lot mark ?????????????????? . p. 25 10.0 general p recaution ????????????? .. p. 28
hannstar display corp. document title HSD150MX49-A product information page no. 4 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 1.0 general description 1.1 introduction hannstar display model hsd150mx 49 -a is a color active matrix thin film transisto r (tft) liquid crystal display(lcd) that uses amorphous silicon tft as a switching device. this model is composed of a tft lcd panel, a driving circuit and a back light system. this tft lcd has a 15 inch diagonally measured active display area with xga resolution (768 vertical by 1024 horizontal pixel array) and can display up to 16 million colors. 1.2 features | high brightness with low power consumption | wide viewing angle | compact and light weight design | 2 ccfls(cold cathode fluorescent lamp) | hsync, vsync and de mode | lvttl interface with simulate 8- bit color data .( 6-bit + frc ) 1.3 applications | desktop monitors | moniputers | display terminals for av applications | monitors for industrial applications 1.4 general information item specification unit display area 304.1(h) x 228.1(v) mm number of pixel 1024(h) x 768(v) pixels pixel pitch 0.297(h) x 0.297(v) mm pixel arrangement rgb vertical stripe display color 16.2 million colors display mode normally white surface treatment antiglare, hard-coating(3h) weight (1050) g back-light 2-ccfls, bottom edge side input signal lvttl interface with simulate 8- bit color data . ( 6-bit + frc ) power consumption tbd w optimum viewing direction 6 o ? clock
hannstar display corp. document title HSD150MX49-A product information page no. 5 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 1.5 mechanical information item min. typ. max. unit horizontal(h) --- 321 --- mm vertical(v) --- 249 --- mm module size depth(d) --- 11.5 tbd mm weight (without inverter) --- (1050) tbd g 2.0 absolute maximum rating 2.1 a bsolute rating of environment item symbol min. max. unit note storage temperature t stg -20 60 o c operating temperature t opr 0 50 o c vibration(non-operating) v nop -- 1.5 g (1) shock(non-operating) s nop -- 70 g (2) storage humidity h stg 10 90 %rh (3) operating humidity h op 10 80 %rh (3) low pressure(operating) p lop 697 -- hpa (4) low pressure(non-operating) p lnop 116 -- hpa (5) note (1) 10-300hz sweep/cycle, x ,y,z each directions, 0.5hr each (2) 11ms, x, y, z direction, one time each. for this shock test, it is necessary to fill the silicon rubber between the shock jig as buffer. (3) max wet bul b temp .=39 o c (4) 2hrs. (10000 feet) (5) 24hrs. (50000 feet) 2.2 electrical absolute rating 2.2.1 t ft lcd module item symbol min. max. unit note power supply voltage v dd -0.3 4.0 v (1) logic input voltage v in -0.3 v dd +0.3 v (1) 2.2.2 back-light unit item symbol min. max. unit note lamp voltage v l 0 2000 v rms (1) lamp current i l -- 7.5 ma (1) lamp frequency f l 0 100 khz (1)
hannstar display corp. document title HSD150MX49-A product information page no. 6 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. note (1) permanent damage may occur to the lcd module if beyond this specification. functional operation should be restricted to the conditions described under normally operating conditions. 3.0 optical characteristics 3.1 optical specification item symbol condition min. typ. max. unit note contrast cr -- (350) -- (1)(2) rising t r -- -- response time falling t f -- t r +t f =(35) -- msec (1)(3) white luminance (center of screen) y l -- (250) -- cd/m 2 rx -- tbd -- red ry -- tbd -- gx -- tbd -- green gy -- tbd -- bx -- tbd -- blue by -- tbd -- wx -- (0.31) -- color chromaticity (cie1931) white wy k =0 o f =0 o normal viewing angle -- (0.33) -- k l -- (60) -- hor. k r -- (60) -- k u -- (40) -- viewing angle ver. k d cr>10 -- (50) -- k l (70) -- -- hor. k r (70) -- -- k u (45) -- -- viewing angle ver. k d cr>5 (60) -- -- (1)(4) brightness uniformity b uni (70) (75) -- % (5) crosstalk ct(n) k =0 o f =0 o -- -- 1.3 % (6) 3.2 measuring condition | measuring surrounding : dark room | lamp current i bl : 6.0 0.1ma, lamp freq. f l =50khz. | v dd =3.3v, f v =60hz, f dclk =32.5mhz | surrounding temperature : 25 2 o c | 30min. warm-up time.
hannstar display corp. document title HSD150MX49-A product information page no. 7 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 3.3 measuring equipment | lcd-7000 of otsuka electrics corp., which utilized mcpd-7000 for chromaticity and bm-5a for other optical characteristics. | measuring spot size : 10~12mm note (1) definition of viewing angle : note (2) definition of contrast ratio(cr) : measured at the center point of panel luminance with all pixels white cr = luminance with all pixels black k l k r k u k d x =0 o x = 18 0 o 12? o?clock x =90 o 6? o?clock x = 27 0 o
hannstar display corp. document title HSD150MX49-A product information page no. 8 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. note (3) definition of response time : sum of t r and t f note (4) definition of brightness uniformity time optical response white(tft off) black (tft on) white(tft off) 100% 90% 10% 0% t r t f photo-detector (bm-5a) 50cm lcd panel field=2 o
hannstar display corp. document title HSD150MX49-A product information page no. 9 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. note (5) definition of brig htness uniformity luminance uniformity = (min luminance of 9 points)/(max luminance of 9 points )x100% 256 512 768 192 384 576
hannstar display corp. document title HSD150MX49-A product information page no. 10 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. note (6) definition of crosstalk ct(1) ~ ct(4) l(n) ? lb(n) ct(n) = x 100% , n = 1 ~ 4 l(n) where l(n) = luminance of point ? n ? at pattern a (cd/m 2 ) , n=1 ?? 4 lb(n) = luminance of point ? n ? at pattern b (cd/m 2 ) , n=1 ?? 4 the location measured will be exactly the same in both patterns. l0 : luminance with all pixels black l255 : luminance with all pixels white v 1 ?e 8 v 1 ?e 8 v 1 ?e 4 v 1 ?e 4 v 1 ?e 2 v 1 h ?e 8 1 h ?e 8 h 1 h ?e 4 1 h ?e 4 l(1) l(2) l(3) l(4) 1 h ?e 2 v 1 ?e 8 v 1 ?e 8 v 1 ?e 4 v 1 ?e 4 v 1 ?e 2 v 1 h ?e 8 1 h ?e 8 h 1 h ?e 4 1 h ?e 4 lb(1) lb(2) lb(3) lb(4) 1 h ?e 2 pattern a pattern b gray scale: l127 gray scale: l127 gray scale: l0
hannstar display corp. document title HSD150MX49-A product information page no. 11 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 4.0 electrical characteristics 4.1 tft lcd module item symbol min. typ. max. unit note voltage of power supply v dd 3.0 3.3 3.6 v high v ih 2.4 -- 3.6 v input voltage low v il 0 -- 0.9 v current of power supply mosaic i dd -- tbd -- ma (1) vsync frequency f v -- 60.00 75.00 hz (2) hsync frequency f h -- 48.35 60.00 khz main frequency f dclk -- 32.50 39.37 mhz note (1) mosaic: dot checker image grey scale: l0 ?? l255. l0: luminance with all pixels black . l255: luminance with all pixels white . note (2) when f v is too low, a flicker may be occurred on the display. l0 l28
hannstar display corp. document title HSD150MX49-A product information page no. 12 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 1 2 3 4.2 back-light unit the back-light system is an top & bottom edge-lighting type with 2 ccfl (cold cathode fluorescent lamp) . the characteristics of two lamps are shown in the following tables. item symbol min. typ. max. unit note lamp current il 3.0 6.0 7.0 ma(rms) (1) lamp voltage vl -- tbd -- v(rms) i l =6.0ma frequency fl 30 50 80 khz (2) operating life time hr 30,000 -- -- hour (3) tbd at 25 o c startup voltage vs -- -- tbd v(rms) at 0 o c note (1) lamp current is measured with current meter for high frequency as shown below. specified valued are for a lamp. note (2) lamp frequency may produce interference with horizontal synchronous frequency and this may cause line flow on the display. therefore lamp frequency shall be detached from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference. note (3) life time (hr) can be defined as the time in which it continues to operate under the condition : ta=25 3 o c, i l =6.0ma(rms) and f l =50khz until one of the following event occurs : 1. when the brightness becomes 50% 2. when the startup voltage(vs) at 0 o c becomes higher than the maximal value of vs specified above. note (4) max. star t up voltage shall be defined as max. voltage which ccfl can be startup. when the customer select the inverter, the min. value of startup voltage must be higher than ccfl?s max. startup voltage. lcd module a a inverter (hiu-757) 1 2 3
hannstar display corp. document title HSD150MX49-A product information page no. 13 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 5.0 block diagram 5.1 tft lcd module 5.2 back light unit dc/dc converter timing controller i/f connector cn1 gray scale manipulation voltage generation circuit liquid crystal panel 1024 ?? 768 pixels x-driver ic y-driver ic cn2 cn3
hannstar display corp. document title HSD150MX49-A product information page no. 14 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 6.0 interface pin connection 6.1 tft lcd module cn1 1 )2 )3) input signal ( 802rvs-080005r / hannstar electr oni c s co. ) 1) 2) 3) mating connector: 802pvs-080405r-m / hannstar electr oni c s co. ) terminal n o. symbol function terminal n o. s ymbol function 1 gnd ground 41 gnd ground 2 or0 red data r 0 (lsb) odd 42 eg0 green data g0 (lsb) even 3 or1 red data r1 odd 43 eg1 green data g1 even 4 or2 red data r2 odd 44 eg2 green data g2 even 5 or3 red data r3 odd 45 eg3 green data g3 even 6 gnd ground 46 gnd ground 7 or4 red data r4 odd 47 eg4 green data g4 even 8 or5 red data r5 odd 48 eg5 green data g5 even 9 or6 red data r6 odd 49 eg6 green data g6 even 10 or7 red data r7 (msb) odd 50 eg7 green data g7 (msb) even 11 gnd ground 51 gnd ground 12 og0 green data g0 (lsb) odd 52 eb0 blue data b0 ( lsb) even 13 og1 green data g1 odd 53 eb1 blue data b1 even 14 og2 green data g2 odd 54 eb2 blue data b2 even 15 og3 green data g3 odd 55 eb3 blue data b3 even 16 gnd ground 56 gnd ground 17 og4 green data g4 odd 57 eb4 blue data b4 even 18 og5 green data g5 odd 58 eb5 blue data b5 even 19 og6 green data g6 odd 59 eb6 blue data b6 even 20 og7 green data g7 (msb) odd 60 eb7 blue data b7 (msb) even 21 gnd ground 6 1 gnd ground 22 ob0 blue data b0 ( lsb) odd 6 2 gnd ground 23 ob1 blue data b1 odd 6 3 clk pixel clock 24 ob2 blue data b2 odd 6 4 gnd ground 25 ob3 blue data b3 odd 6 5 gnd ground 26 gnd ground 6 6 hsync horizontal synchronization signal 27 ob4 blue data b4 odd 6 7 gnd ground 28 ob5 blue data b5 odd 6 8 gnd ground 29 ob6 blue data b6 odd 6 9 enab data enable 30 ob7 blue data b7 (msb) odd 7 0 vsync vertical synchronization signal 31 gnd ground 71 vdd 3.3 v power supply 3 2 er0 red data r 0 (lsb) even 72 vdd 3.3 v power supply 3 3 er1 red data r1 even 73 vdd 3.3 v power supply 3 4 er2 red data r2 even 74 vdd 3.3 v power supply 3 5 er3 red data r3 even 75 vdd 3.3 v power supply 3 6 gnd ground 76 nc no connection 3 7 er4 red data r4 even 77 ptrn no connection 3 8 er5 red data r5 even 78 mlcng1 no connection 3 9 er6 red data r6 even 79 frc no connection 4 0 er7 red data r7 (msb) even 80 gnd ground note 1) please connect nc pin to nothing. don?t connect it to ground nor to other signal input. (nc pin should be open.) note 2) please connect gnd pin to ground. don?t use it as no-connect nor connect with high i mpedance. note 3) 16.7 million colors are displayed by the combinations of 24 bits data.
hannstar display corp. document title HSD150MX49-A product information page no. 15 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 6.2 back-light unit cn2 1) ccfl power source (bhr-03vs-1/japan solderless terminal mfg co., ltd) mating connector : sm02 (8.0) b-bhs/japan solderless terminal mfg co., ltd) terminal n o. symbol function 1 vl1 ccfl power supply (high voltage) 2 nc 1) 3 gl1 ccfl power supply (low voltage) cn3 1) ccfl power source (bhr-03vs-1/japan solderless terminal mfg co., ltd) mating connector : sm02 (8.0) b-bhs/japan solderless terminal mfg co., ltd) terminal n o. symbol function 1 vl 2 ccfl power supply (high voltage) 2 nc 1) 3 gl2 ccfl power supply (low voltage) note 1) please connect nc pin to nothing. don ? t connect it to ground nor to other signal input. (nc pin should be open.)
hannstar display corp. document title HSD150MX49-A product information page no. 16 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 6.3 relationship between displayed color and input msb lsb msb lsb msb lsb gray scale display r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 level black l l l l l l l l l l l l l l l l l l l l l l l l - blue l l l l l l l l l l l l l l l l h h h h h h h h - green l l l l l l l l h h h h h h h h l l l l l l l l - light blue l l l l l l l l h h h h h h h h h h h h h h h h - red h h h h h h h h l l l l l l l l l l l l l l l l - purple h h h h h h h h l l l l l l l l h h h h h h h h - yellow h h h h h h h h h h h h h h h h l l l l l l l l - basic color white h h h h h h h h h h h h h h h h h h h h h h h h - black l l l l l l l l l l l l l l l l l l l l l l l l l0 l l l l l l l h l l l l l l l l l l l l l l l l l1 dark l l l l l l h l l l l l l l l l l l l l l l l l l2 ?? ?j ?j ?j l3 ?k l251 ?? h h h h h l h h l l l l l l l l l l l l l l l l l255 light h h h h h h l h l l l l l l l l l l l l l l l l l255 h h h h h h h l l l l l l l l l l l l l l l l l l255 gray scale of red red h h h h h h h h l l l l l l l l l l l l l l l l red l255 black l l l l l l l l l l l l l l l l l l l l l l l l l0 l l l l l l l l l l l l l l l h l l l l l l l l l1 dark l l l l l l l l l l l l l l h l l l l l l l l l l2 ?? ?j ?j ?j l3 ?k l251 ?? l l l l l l l l h h h h h l h h l l l l l l l l l255 light l l l l l l l l h h h h h h l h l l l l l l l l l255 l l l l l l l l h h h h h h h l l l l l l l l l l255 gray scale of green green l l l l l l l l h h h h h h h h l l l l l l l l green l255 black l l l l l l l l l l l l l l l l l l l l l l l l l0 l l l l l l l l l l l l l l l l l l l l l l l h l1 dark l l l l l l l l l l l l l l l l l l l l l l h l l2 ?? ?j ?j ?j l3 ?k l251 ?? l l l l l l l l l l l l l l l l h h h h h l h h l255 light l l l l l l l l l l l l l l l l h h h h h h l h l255 l l l l l l l l l l l l l l l l h h h h h h h l l255 gray scale of blue blue l l l l l l l l l l l l l l l l h h h h h h h h blue l255 black l l l l l l l l l l l l l l l l l l l l l l l l l0 l l l l l l l h l l l l l l l h l l l l l l l h l1 dark l l l l l l h l l l l l l l h l l l l l l l h l l2 ?? ?j ?j ?j l3 ?k l251 ?? h h h h h l h h h h h h h l h h h h h h h l h h l255 light h h h h h h l h h h h h h h l h h h h h h h l h l255 h h h h h h h l h h h h h h h l h h h h h h h l l255 gray scale of white & black white h h h h h h h h h h h h h h h h h h h h h h h h white l255
hannstar display corp. document title HSD150MX49-A product information page no. 17 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 6.4 pixel format note: the first pixel is even pixel. r g b r g b r g b r g b r g b r g b r g b line 0 r g b r g b r g b r g b r g b r g b line 1 r g b r g b r g b r g b r g b line 2 r g b r g b r g b r g b line 3 r g b r g b r g b line 4 r g b r g b line 5 r g b r g b r g b r g b r g b r g b r g b 76 7 h line pixel 0 pixel 1 pixel 2 pixel 3 pixel 4 pixel 5 102 3 h pixel 1024 pixels lcd display area 1 pixel = r g b 768 lines r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b
hannstar display corp. document title HSD150MX49-A product information page no. 18 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 7.0 interface timing 1)2)3)4)5)6) 7.1 timing parameters (hsync, vsync and de mode) item symbol min. typ. max. unit remarks period t1 778 t4 ?e 806 t4 16.67 860 t4 ?e ?e ms 1) 5) active t2 ?e 768 t4 1 5 . 88 ?e ?e ms 1) vertical display term display start t3 4 t4 ?e ?e 256 t4 ?e ?e ms 1) period t 4 590 t7 ?e 6 72 t7 20.68 700 t7 ?e ?e m s 1) 5) active t 5 ?e 512 t7 15.76 ?e ?e m s 1) horizontal display term display start t6 16 t7 ?e ?e 512 t7 ?e ?e m s 1) period t 7 25.00 30.77 ?e ns 5) l ow t ime t 8 9 ?e ?e n s clock h igh t ime t 9 9 ?e ?e n s s etup t ime t 10 2 ?e ?e n s data h old t ime t11 5 ?e ?e n s note 1) refer to timing chart at page18, 19 and 20. note 2) in case of using the long fram e period, the deterioration of display quality, noise etc. may be occurred. note 3) when enab is fixed to ? l ? level after nclk input, the panel is displayed as black. however, a flicker may be occurred on the display. when enab is fixed to ? h ? level after nclk input, the panel will be damaged. note 4) do not fix nclk to ? h ? or ? l ? level while the v dd (+3.3v) is supplied. if nclk is fixed to ? h ? level or ? l ? level for certain period while the v d d (+3.3v) is supplied, the panel may be damaged. note 5) do not change t1 and t4 values in the operation. when t1 or t4 is changed, the panel is displayed as black. note 6) please adjust lcd operating signal timing and fl driving frequency, to optimize the display quality. there is a possibility that flicker is observed by the interference of lcd operating signal timing and fl driving condition (especially driving frequency). note 7) input vertical display term quantity should be 2+768 = 770 lines
hannstar display corp. document title HSD150MX49-A product information page no. 19 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 7.2 timing diagram of interface signal (hsync, vsync and de mode) 24 bit two pixel/clock input mode ( 1) vertical t2 t1 t 4 ncl ena ( 2) horizontal t 7 t 5 t 4 ncl ena t 4 or7~or0 og7~og0 ob7~ob0 er7~er0 eg7~eg0 eb7~eb0 or7~or0 og7~og0 ob7~ob0 hsync vsync hsync t 3 t 6 x even , y x odd , y x even , 0 x eve n , 1 x even , 2 x even , 76 5 x even , 76 6 x even , 76 7 x odd , 0 x odd , 1 x odd , 2 x odd , 765 x odd , 766 x odd , 76 7 er7~er0 eg7~eg0 eb7~eb0 0,y 2,y 4,y 6,y 1,y 3,y 5,y 7,y x 2n-1 ,y x 1021 ,y x 1023 ,y x 2( n-1) ,y x 1020 ,y x 1022 ,y
hannstar display corp. document title HSD150MX49-A product information page no. 20 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 1.65(v) a b duty( a,b) ?g 50 10% t 5 t 6 t 7 v ih (min) : 2.64 (v) v il (max) : 0.66 (v) enab or7-or0 og7-og0 ob7-ob0 er7-er0 eg7-eg0 eb7-eb0 valid data v ih (min) : 2.64 (v) v il (max) : 0.66 (v) t 8 t 9 nclk
hannstar display corp. document title HSD150MX49-A product information page no. 21 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 7.3 power on/off sequence item min. typ. max. unit remark t1 0 ?e 10 msec t2 0 ?e 50 msec t3 0 ?e 50 msec t4 1 ?e ?e sec t5 200 ?e ?e msec t6 200 ?e ?e msec note (1) the supply voltage of the external system for the module input should be the same as the definition of v dd . (2) apply the lamp volatge within the lcd operation range. when the back-light turns on before the lcd operation or the lcd truns off before the back-light turns off, the display may momentarily become white. (3) in case of v dd = off level, please keep the level of input signal on the low or keep a high impedance. (4) t4 should be measured after the module has been fully discharged between power off and on period. (5) interface signal shall not be kept at high impedance when the power is on. power supply signal backlight (recommend ) 0v 0v power on power off 0.9v dd 0.1v dd 0.9v dd 0.1v dd 0.1v dd 0.6 0.6 50% 50% t1 t2 t3 t4 t5 t6
hannstar display corp. document title HSD150MX49-A product information page no. 22 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 8.0 outline dimension 8.1 front view outline dimension u u nit : mm
hannstar display corp. document title HSD150MX49-A product information page no. 23 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. note: 1. unspecified dimensional tolerance are 0.5mm 2. cn1 connector: 802rvs-080005r(hannstar electronics co.) 3. cn1 connector fixed screw length please reference section sa-sa. section sa-sa 8.2 back view outline dimension u u nit : mm
hannstar display corp. document title HSD150MX49-A product information page no. 24 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 9.0 lot mark 9.1 lot mark 2 3 ? ? 10 11 12 13 14 15 code 1,2,3,4,5,6: hannstar internal flow control code. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number. note (1) production year year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 mark 9 0 1 2 3 4 5 6 7 8 note (2) production month month jan. feb. mar. apr. may. jun. jul. aug. sep. oct nov. dec. mark 1 2 3 4 5 6 7 8 9 a b c 9.2 location of lot mark (1) the label is attached to the backside of the lcd module. (2) this is subject to change without prior notice. hsd150mx 49 - a rev: lot mark
hannstar display corp. document title HSD150MX49-A product information page no. 25 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 10.0 general precaution 10.1 use restriction this product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic. 10.2 d isassembling or modification do not disassemble or modify the module. it may damage sensitive parts inside lcd module, and may cause scratches or dust on the display. hannstar does not warrant the module, if customer s disassemble or modify the module. 10.3 breakage of lcd panel 10.3.1 if lcd panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin. 10.3.2 if liquid crystal contacts mouth or eyes, rinse out with water immediately. 10.3.3 if liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse t horoughly with water. 10.3.4 handle carefully with chips of glass that may cause injury , when the glass is broken. 10.4 electric shock 10.4.1 disconnect power supply before handling lcd module. 10.4.2 do not pull or fold the ccfl cable. 10.4.3 do not touch the parts inside lcd modules and the fluorescent lamp?s connector or cables in order to prevent electric shock. 10.5 absolute maximum ratings and power protection circuit 10.5.1 do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts? parameters, environmental temperature, etc., otherwise lcd module may be damaged. 10.5.2 please do not leave lcd module in the environment of high humidity and high temperature for a long time. 10.5.3 it?s recommended to employ protection circuit for power supply. 10.6 operation 10.6.1 do not touch, push or rub the polarizer with anything harder than hb pencil lead. 10.6.2 use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the lcd module for incoming inspection or assembly. 10.6.3 when the surface is dusty, please wipe gently with absorbent cotton or other soft material.
hannstar display corp. document title HSD150MX49-A product information page no. 26 / 2 6 document no. revision 1.0 the information contained in this document is the exclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar display corporation. 10.6.4 wipe off saliva or water drops as soon as possible. if saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading. 10.6.5 when cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent. 10.7 mechanism please mount lcd module by using mouting holes arranged in four corners tightly. 10.8 static electricity 10.8.1 protection film must remove very slowly from the surface of lcd module to prevent from electrostatic occurrence. 10.8.2 because lcd module use cmos-ic on circuit board and tft-lcd panel, it is very weak to electrostatic discharge. please be careful with electrostatic discharge. persons who handle the module should be ground ed through adequate methods. 10.9 strong light exposure the module shall not be exposed under strong light such as direct sunlight. otherwise, display characteristics may be changed. 10.10 disposal when disposing lcd module, obey the local environmental regulations.


▲Up To Search▲   

 
Price & Availability of HSD150MX49-A

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X